No part of a garden should be left undecorated. The Falling Diamonds Corner Fountain can instantly transform an empty garden or courtyard corner into a beautiful, relaxing oasis.
This six-piece outdoor fountain features streaming lines of water that trickle down from the top to the bottom. Once the water reaches the bottom, it separates into several different channels where it gently flows into the large bottom basis. It is a calming, relaxing effect that is a perfect addition to any garden or courtyard.
More product details:
- Weighs approximately 637 lbs.
- 61.5 in tall x 44 in wide x 31 in front to back depth.
- Customizable with your choice of 25 different stone finishes
- Comes shipped with six pieces of stone, a lighting kit, the Hi-Tech water pump from Henri, all water tubing and necessary hardware
Shown here in Relic Nebbia finish
Because of the natural characteristics of our products, no two pieces will be identical.
Colors are represented as accurately as possible.
Winter Care for Your Fountain
Many fountain materials expand and contract in response to temperature and humidity changes, making winter protection essential. If temperatures drop below 32°F or humidity levels shift significantly, follow these steps to safeguard your fountain:
- Bring Indoors (If Possible): Move your outdoor fountain inside for the winter to protect it from harsh conditions.
- Store in a Dry, Covered Area: If bringing the fountain indoors isn’t possible, store it in a dry, covered location.
- Remove Internal Components: Move any removable parts (e.g., stoppers, tubing, lights, pump) indoors. The pump can remain in the fountain if fully drained, wrapped in plastic bags, and insulated with towels to keep it dry. However, bringing it inside is recommended.
- Drain Completely: Prevent water from collecting anywhere in the fountain, as freezing and thawing can damage the pump and crack the fountain structure. Remove drain plugs to ensure complete drainage.
- Elevate the Fountain: If storing indoors or in a dry location isn’t feasible, raise the fountain off the ground to prevent freezing and cracking at the base.
- Cover Properly: Use a breathable cover, not plastic, to avoid trapped moisture. Ensure the cover is taut so snow and water don’t accumulate, and tie the bottom securely around the fountain.
Lead Time Notice: Standard production lead time is 4–6 weeks. If you need your fountain sooner, rush production (2–3 weeks) may be available upon request for an additional $250–$500 fee, depending on the model and workload.
