Triple Scupper Water Fall

Triple scupper water fall with scuppers at staggered heights.
Also can be built with all 3 scuppers at the same height.
Or we can build it with 1 long scupper in the middle.

This custom water fall will be the focal point of
your home yard or office courtyard.

Approximate build out time for this custom water feature is 12 to 16 weeks.

Size shown is 8ft wide x 6ft tall above ground measurements.
Total height with basin: 7ft.
Main image has Kenai Faux Brick. Client upgraded to semi-round basin. Standard basin is rectangle 24″ wide x 12 deep.

The 6ft wide version has 3 water scuppers, 18″ wide each.

Stainless Basin for this size is 72″ wide x 24″ front to back x 12″ deep.
Basin comes with slightly recessed grating (2″down)to place 1.5″ decorative rocks.
Pump and water are held in basin. Comes with pump and auto fill device.

3ft wide x 5ft tall (above basin) : $7995.00
Total height with basin is 6ft. See Schematic in gallery.
This size would have 3 scuppers, 8″ wide each,
or one 24″ wide single scupper in the center.

8ft wide x 6ft tall (above basin) : $16,500.00
Total height with basin is 7ft. See Schematic in gallery.

$1500 upgrade fee to make basin semicircle, see schematic in gallery.

20ft long x 6ft tall above basin: $39,950 + shipping and install TBD.
This large beauty would look great in any courtyard, or in an office or hotel lobby!
Or even in a room in your house, if you have the space! Real attention getter!
See schematics in gallery for dimensions.

We can build any size you need!
Email size and address for custom quote to sales@fountains.com

Image #2 in gallery shows a standard faux brick water wall with
stainless trim and iron ore panel.
Stainless trim is 10″ wide on side.

Unit comes with silver stainless trim and basin standard.

The basin and trim can also be powder coated just about any color for $1000 upgrade fee.

Client provides their own rocks for the basin.

Most clients bury the basin 12″ under ground, but can be on top of ground also.

Ships plug and play ready.

8 different colors for Faux Brick panel shown in the gallery.

Normally the back is left open on these units, since most clients Place against a fence or wall. If you need the back to be decorative we can add faux brick covering to back for $1500 upgrade fee shown in the drop-down menus below.

Please see images in gallery from a client who wanted faux brick on back side also. Shows how panels open in back to access pipes etc. This is optional, for upgraded price. Not needed if yours will go against a wall or fence.

Shipping price to be determined on this custom item.

Discounts do not apply on this custom item.

No free shipping on this custom item.

Payment is direct wire or check only.
Call or email us to get payment info.