Wiltshire Fountain

The Wiltshire Fountain is 60.5” H x 47” W x 47” D. Total weight is 774 pounds.
Includes UL-listed pump. No plumbing is needed. Water recirculates within the fountain.
The black, six-foot cord plugs into any standard 3-prong electrical outlet.
Cast stone and concrete construction
Shown in Terra Nera (TN)
Uses Fountain Cover:
FTNCOV-MED
Pump included and installation instructions :
See Fountain Assembly Instructions Here
See Process Here
Ideal for outdoor us
No additional water source.
No plumbing needed
Pump recirculates water
Comes in 12 different colors to match your surroundings

Winter Care for Your Fountain

Many fountain materials expand and contract in response to temperature and humidity changes, making winter protection essential. If temperatures drop below 32°F or humidity levels shift significantly, follow these steps to safeguard your fountain:

1. Bring Indoors (If Possible): Move your outdoor fountain inside for the winter to protect it from harsh conditions.
2. Store in a Dry, Covered Area: If bringing the fountain indoors isn’t possible, store it in a dry, covered location.
3. Remove Internal Components: Move any removable parts (e.g., stoppers, tubing, lights, pump) indoors. The pump can remain in the fountain if fully drained, wrapped in plastic bags, and insulated with towels to keep it dry. However, bringing it inside is recommended.
4. Drain Completely: Prevent water from collecting anywhere in the fountain, as freezing and thawing can damage the pump and crack the fountain structure. Remove drain plugs to ensure complete drainage.
5. Elevate the Fountain: If storing indoors or in a dry location isn’t feasible, raise the fountain off the ground to prevent freezing and cracking at the base.
6. Cover Properly: Use a breathable cover, not plastic, to avoid trapped moisture. Ensure the cover is taut so snow and water don’t accumulate, and tie the bottom securely around the fountain.